|
Bar Faucets |
|
|
WARNING - FLUSH BEFORE USE.
If your bar faucets are older and not used regularly, it is recommended to let the water run for a few minutes to flush out any accumulated lead. Most bar faucets purchased prior to late 1990s were constructed of brass or chrome-plated brass, which contain up to 8 percent lead. Look for faucets that are labeled "Low Lead Compliant".
For more information go to "Lead in Drinking Water" |
Bar faucets and bar sinks are usually a size smaller than those used in kitchens. This is mainly because the available space for a wet bar is often limited, especially if you want to squeeze in a small refrigerator as well.
Just like with other faucets there is a wide selection of bar faucets available from traditional bar faucets to contemporary bar faucets. The faucets are either single or double handled. Some come with a stand-alone or built-in spray which makes cleaning up after use easier.
- Bar faucet finishes
- More helpful links
BAR FAUCET FINISHES
Regardless of appearances, faucets are usually made of brass. So the popular 'nickel' bar faucet is made of brass but has a nickel finish.
Depending on brand and manufacturer other bar faucet finishes are marketed as antique brass, satin nickel, oil rubbed bronze or polished copper.
FOR MORE INFORMATION SEE ALSO
Faucets - Kitchen, Bathroom
Faucets - Bathtub/shower, shower
Faucets - Warning about air gap and cross contamination
Laundry Tubs, Sinks and Taps
Lead in drinking water from faucets, solder and watermains |
|
|
|
|
|
Back to Top |
|